COVNA Z15W Female Thread Gate Valve
COVNA lead free brass compact pattern threaded gate valve with cast iron handle, threaded ends comply with ANSI B1.20.1, 150 PSI non-shock WOG.Widely used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Body material support Stainless steel or Brass.
- Model: Gate Valve
- Size Range: 1/2" to 4"
- Pressure Range: 1.6 to 6.4MPa
- Material: Brass, Stainless Steel
COVNA Brass Female Thread Gate Valve
A gate valve is the most common type of valve that used in any process plant. It is a linear motion valve used to start or stop fluid flow. In service, these valves are either in fully open or fully closed position.
When the gate valve is fully open, the disk of a gate valve is completely removed from the flow. Therefore virtually no resistance to flow. Due to this very little pressure drops when fluid passes through a gate valve.
To achieve proper sealing, when the valve is fully closed, 360° surface contact is required between disk and seats.
Gate valves should not be used for regulation or throttling of flow because accurate control is not possible. The high velocity of the flow in the partially open valve may cause erosion of the disc and seating surfaces and also creates vibration and noise.
Female Thread Gate Valve Export Destination Worldwide
|Ecuador||Netherlands||South korea||Vietnam||Thailand etc.|